The quality of the tweeter is decisive for the resolution and the true-to-pulse detail reproduction of a loudspeaker. In accordance with Newton's law, a low moving mass and a strong magnetic drive are required, and the diaphragm must of course be able to follow all these excursions. In cooperation with a German tweeter specialist, we developed a beryllium dome tweeter whose moving mass is only half that of all previously used tweeters. In conjunction with the ultra-strong iron-neodymium magnet, this results in a level of impulse fidelity that previously seemed impossible.
Midrange diaphragms need not be able to follow such high accelerations, of course, but they must be much larger than tweeter domes in order to irradiate the same sound pressure level. Large diaphragms are correspondingly more susceptible to partial vibrations and resonances. To prevent these from having a sonic influence, they must occur above the transmission range of the midrange driver (> 3,400 Hz). We achieved this by developing the aluminum polymer diaphragms of our X-Pulse drivers.
Every cabinet with sharp edges and corners produces diffration and reflections of the sound waves which colourate the sound and destroy stage imaging. Therefore we only use rounded drop-shaped cabinets which avoid these disturbing effects.
The upper bridge determines the overall bass volume: -1.5 dB, linear and + 1.5 dB in the entire bass range i.e. from 22 Hz to 144 Hz. The horizontal bridge in the Bass Extension System can also be replaced by one of the four adjustment modules. This allows a boost in the range between 30 Hz and 70 Hz in 6 steps. With these two alignment options, you can easily adjust the Capellos to your listening room. Your dealer will be happy to help you with this.
The illustrated crossover of the Capello 100 with its 56 individual components is a prime example of our unique circuit topology, which is used for the first time in Hi-Fi. The top priority here is the perfect reproduction of the impulses that make up music. Especially with the Capello we show impressively that the circuitry of the individual speaker drivers is more important than any speaker cone material. Of course, we use only the highest quality components from the two German manufacturers Mundorf and Intertechnik.
With the tweeter, the most important thing is that it has the lowest possible moving mass and that the diaphragm is torsionally stiff. In cooperation with a German tweeter specialist, we succeeded in developing two tweeters that set new benchmarks in this area. This resulted in our new aluminium tweeter and the unique beryllium tweeter.
A midrange cone must also be as light as possible, but must not exhibit any resonance or partial vibrations. Our new Capello midrange driver is a prime example of such a speaker driver.
circuitry of the Capello loudspeakers breaks all previous rules
regarding quality and number of components. As the crossover directs
the crucial frequencies to their mechanical counterparts this
filtering is essentially more important than the drivers’
materials. As a novelty in Hi-Fi history we use crossovers with a
completely new topology with extreme steep slopes and our unique
Of course we exclusively use components from the German specialist companies Mundorf and Intertechnik. Not the diaphragm material is decisive but the skilful circuitry which is driving the different ways in a multi-way loudspeaker system.
Newly developed long-throw woofers give all Capello speakers power and a real foundation. We made sure to build special drivers that still radiate linearly even with larger strokes and thus can drive gigantic high levels. More importantly, however, is the enormous bass precision of this new type of woofer design. You will hear this from the first note.
If you want to climb to the highest sonic peaks of the Capello speakers, we recommend our tuning variant, the "Double Vision" version. Using extremely high quality crossover components, better internal wiring, rhodium plated gold bridges, the large WBT-Nextgen terminals and finer selection, the Capellos filter out even more subtleties from the music, resulting in that effortless music reproduction that can be so extremely relaxing. Please always order directly at the time of purchase, as retrofitting is not possible here!
From development and production to the final inspection with listening test - every loudspeaker is manufactured in Renningen.
With our unique GAUDER Lifetime-Update your loudspeaker will always be technically and sonically up to date.
The new fantastic ceramic tweeter with enormous resolution and detail - now in the MK II series.
We know about the quality of our speakers. Therefore we grant for registered loudspeakers
10 years warranty.
Would you like more information about our speakers? Would you like to visit our factory or test a loudspeaker?
Please feel free to call us (phone +49 7159 920161) or send us this contact form. We will get back to you as soon as possible.
YOUR GAUDER ACOUSTICS TEAM